Ever imagined running your own laser cutter? Here are five tips to get you started cutting patterns into everyday stuff like wood or newspaper. Laser reducing – sometimes called etching or engraving – isn’t just one of the coolest means of bringing a design to life but also, by far, the most appropriate. While it might be easy to create and slice out a small sign yourself, a laser cutter can do a lot more, like the kind of multi-layered lettering and design that a good skilled designer would struggle to execute.

What laser must I get?

Between co2 laser cutter, extractor lover and sourced materials used to build the rig, Roe said that it cost someplace in the region of EUR8,000 to create, whereas store-bought laser cutters from places like Epilog will cost you somewhere in the region of EUR20,000. This might seem like a cost the average beginner would balk at, but dread much less cheap alternatives exist. Starting out a little smaller, there are a number of 40W laser cutters available directly from eBay.Read more.

Where do I source the equipment to develop one?

Following Tog’s example, your one-stop shop is an online site called Lasersaur that offers people an open-source shopping list for building your own laser cutter. It also carries a step-by-step guide in developing one if you are beginning with scuff with little-to-no experience. It really is then simply a case of investing in the hours into sourcing the necessary parts. In cases like this, eBay will be your go-to place where parts can be shipped set for a small fraction of the price of buying locally, in many cases.

What materials do I use for laser slicing?

It might seem to be obvious, but you can’t just decide on any old materials and start blasting it with a co2 laser cutter. Also, it is advised to stay away from cardboard as the concentrated, intense heat can cause it to catch fire very easily and, when coping with electrical equipment, trying to put it out becomes that bit more complicated.

Among the better materials to make use of are the cheap and readily available birch plywood only a few millimeters dense. With this, a straightforward design can be etched out in just over one minute. Check here.

What must I make first?

When it comes to sourcing some cool designs to start out with, the internet is your friend. It is as easy as typing ‘SVG designs’ into Google and finding one you truly like. Along with SVG documents, the other laser beam cutter-friendly record type is DXF, which [Read the rest]

How to Get Started With Laser Cutting? – Beginners Guide


Laser Cutters are incredible apparatuses offering the likelihood to make a wide range of things. From straightforward boxes to etching nitty-gritty illustrations into wood or building complex three-dimensional articles.

What is a laser cutter?

A laser cutter is a PC controlled machine that uses a laser shaft to definitely cut or imprint material. A laser is essentially just exceptionally centered, profoundly enhanced light. The laser bar makes the material locally consume, dissolve or vaporize. The sort of material that a laser can cut relies upon the kind of laser and the particular machine’s capacity. The expression “Laser” is an abbreviation for “Light Amplification by Stimulated Emission of Radiation”. Laser innovation was created during the 1960s.

There are various kinds of laser cutters. This guide will concentrate on gas lasers and CO2 lasers specifically, as this sort is most generally utilized by hobbyists and private ventures. Different sorts are for instance fiber or gem lasers which are for the most part utilized for modern applications. CO2 laser cutters are fit for cutting and etching a wide scope of non-metallic materials, for example, wood, paper, acrylic, materials, and calfskin. For more materials and subtleties look here. Check here!

How does a laser cutter work?

In a CO2 laser cutter machine, the laser bar is made in a tube loaded up with CO2 gas. Next, with the assistance of mirrors and focal points, the laser shaft is coordinated to the laser head and concentrated on the material surface. Electronically controlled engines move the laser head to cut or etch the ideal shape into the material of the workpiece. At the point when the laser hits the material, a little zone is warmed in an amazingly brief period, making the material dissolve, consume or vaporize.


At the point when the laser pillar goes entirely through the material of the workpiece it makes a cut. A laser cut is commonly extremely exact and clean. The vibe of the cut edges relies upon the material. For instance, the edges of cut wood are average of a darker brown than the first wood. The edges of acrylic don’t change shading and have a decent lustrous completion after laser cutting. The kerf of a laser cutter is little. The term kerf alludes to the width of the notch made while cutting. This differs from material to material and is likewise subject to the particular settings of the laser. For some materials, the kerf will be somewhere close to 0.05 mm (0.002 in) and 0.5 mm (0.02 in).


Marking is the point at which the laser doesn’t expel material however for instance, changes the shade of … [Read the rest]

Mechanical Cutting vs. Laser Cutting vs. Milling

Nowadays, the most popular and broadly used cutting processes include mechanical cutting and laser cutting as well as milling. These processes perform the same task, but they are dissimilar in terms of equipment, production capabilities, and price. Each method has its own pros and cons.

1. Mechanical Cutting Process and Its Equipment

The mechanical cutting uses energy-driven equipment to shape the material along with a predefined design. Lathes, drill presses, and milling are the most common machines used in the mechanical cutting process.


The lather is a metallurgical machine that uses a computer controlled engine to spin the material. To prepare the desired shape, hardened cutting blades are used to eliminate needless cloth.

Drill Press

A drill press is driven by an induction motor and screwed to the floor or mounted on a table. It consists of a drill head, an axle, a table, a pillar as well as a base. The cylindrical holes are prepared in the workpiece using a drill that is lowered and raised by a three-pronged handle.


A milling machine is familiar with making the desired cuts; it has a moveable table that has the workpiece fond of it together with a stationary cutting tool. The instructions that are needed to move the board and make the desired cut are provided physically or through a computer. The four main categories of the milling machine are Omniversal, universal, flat milling and manual milling.

2. Laser Cutting Process and Its Procedure

Currently, laser cutting is the new and most competent way to cut material. Use the power emission device to do the work. To create the necessary cuts, a high concentration of photon fluxes is generally used. These currents are subject to the area where the basic cut will be made. The fact that these lasers are controlled by a computer eliminates the possibility of error. There are two different types of laser cutters: CO2 laser cutter and ND YAG laser cutter. Click here.

Mechanical Cutting vs. Laser Cutting

Because of the fact that laser cutting both cuts the material and applies a finish to a product, it can simply be said that laser cutting is a more agile process compared to its alternative mechanical cutting process. The possibilities of accidental markings or contamination in laser cutting are very low since there is no direct contact between the laser device and the material. In addition, laser cutting produces a smaller area affected by heat, which reduces the risk of deformation and wraps the material at the cutting site.

On the other hand, laser cutting can be a very expensive and multifaceted manufacturing method. However, … [Read the rest]

Things You Should Know Before Buying a Laser machine

Before you can purchase a laser machine, there are a couple of things that you should make sure about. Things that can influence the type of machine that you are going to purchase. Many people regret the laser cutter that they have bought. And, this just because they didn’t consider these things before, they were purchasing their machine.

The maintenance costs of the machine

Before you can purchase a laser cutter, you need to make sure that you know what the maintenance costs are going to be. Some of these machines are expensive to do maintenance on. And, this is something that you don’t want. The more you are spending on the maintenance, the less profit you are going to make at the end of the day.

Ask around and make sure that you are doing research about the maintenance costs of the machine. This is the only way that you can make sure that you are going to get the right cutter for your business.

Will you be able to get replacement parts easily?

When the laser machine breaks, and you need to replace a part, will the part be easy to find? The last thing that you want is to wait for weeks for the replacement parts to arrive so that you can continue on working.

The longer the machine is standing without repairs, the more money you are going to lose. Ask the agent and make sure that the replacement parts are always at hand. Without waiting for days before you can actually repair the machine.

How difficult is the laser cutter going to be to use?

Will anyone is able to use the laser cutter? You don’t want to have a laser cutter where your workers need to go on courses before they can use the cutter. This is going to cost extra money at the end of the day.

The easier the machine will operate, the better it will be for you, and the productivity of your business. You won’t need to worry about learning your workers how to use it correctly before you can start using it. Learn more.

Does the laser cutter have great features that are making it worth buying?

Different laser machines have different features. The more features the machine have, the better it will be for your business. And, the better it will be worth the money you spend on it.

This is why you should do some research and make sure that you are looking at the different features. By buying a machine with more features, you are going to get a much better deal.… [Read the rest]

co2 laser engraver safety

Laser Engravers produce lethal high voltage and laser radiation equipped for causing moment visual impairment and tissue harm. Lasers are a fire peril. Keep quenchers close and NEVER leave the machine unattended. The lasing procedure caused risky, and some of the time dangerous, smoke and gasses that will kill you and actually demolish your machine!


The carbon dioxide laser (CO2 laser) was one of the most punctual gas lasers to be created. It was developed by Kumar Patel of Bell Labs in 1964 is as yet a standout amongst the most valuable. Carbon dioxide lasers are the most astounding force consistent wave lasers that are right now accessible. They are additionally very proficient: the proportion of yield capacity to pump power can be as expansive as 20%. The CO2 laser delivers a light emission light with the vital wavelength groups fixating on 9.4 and 10.6 micrometers (μm).


Clients should be legitimately prepared on the potential perils, control measures, lab and maker’s working systems, utilization of individual defensive hardware (PPE), crisis techniques, and security insurances for working the etcher. The required PPE incorporates security glasses to shield eyes from radiations, particles, trash, and so on., legitimate skin assurance to diminish consumes and hearing insurance (if essential).

The acrylic laser security seeing windows introduced in the US made laser etchers like ULS, Epilog, and so forth… in a blend with wellbeing, interlocks do give satisfactory assurance and adjust to distributed security principles. The orange windows in the K40 lasers are to a great extent thought to be sufficient and they might be that as it may, given the absence of value control and cloning by the Chinese laser markets, I don’t know I would confide in my visual perception to them. Keep in mind the “phony” shroud glasses disaster of 2017?

3. Hardware OPERATION

Completely encased and interlocked laser cutters are typically generally safe, Class 1 lasers as per ANSI Z136.1 Safe Use of Lasers. These gadgets are protected when utilized as outlined, without controlling the security includes, and are absolved from UW laser enrollment and other control measures.

In any case, the lasers installed inside the encased framework are frequently Class 3B or Class 4 lasers, which radiate high vitality laser bars fit for causing genuine eye and skin damage if the pillar isn’t contained inside the gadget. In this way, wellbeing interlocks ought to never be skirted. Learn more.

4. Perilous MATERIALS

A few materials can find fire amid cutting tasks making exhaust and smoke inside the gadget. Earth and flotsam and jetsam may cause fire and a low-quality cut … [Read the rest]

Reducing Fire Hazards with Your Laser Machine

It is quite risk if you will not reduce the fire hazards. You can use the laser machine to help you reduce the fire risks. If they are reduced, then you will secure your life. You should know some possible ways in which you can have it well reduced. There some of the tips you have to know well when you need to reduce the fire risks. If they are mastered well, then you will not have cases of fire risks. This will hence help you to stay quite very safe I your home.

  1. Do not operate the laser cutter unattended

If you need to have the machine serving you well, never leave the laser cutter not attended. Your can get the fire reduced without much struggle if you can get the machine always the time well cared for. This will limit you from encountering a lot of problem at one gIt is quite risk if you will not reduce the fire hazards. You can use the laser machineiven time. you will not be in problem so much when you have it kept well. Your work will be easy, thus helping you a lot.

  1. Let the area around the machine be kept clean

When you are keeping your machine, you should find your possible way to have the are where the machine is kept always very clean. This will aid you to make your work easy in keeping the machine quite clean. Your machine will be free from any contamination one the area is kept quite clean. This will aid you in any manner you may desire to have your things working well for you. It can also be one of the best thing you will have to do, thus giving you all you need to deal with.

  1. Have the properly scrutinized extinguisher on your hand

Let the fire extinguisher be well inspected before you use it any more. Your Co2 laser cutter, should also be looked at in the best way possible. This will keep it working well for you all the time you need to use it. It can then be of your benefit, thus giving you all you may need. this can then be the best you can do, thus giving you all you may need to take place to you. it is therefore good if you can ensure that you machine is well serviced before you use it in doing your work.

  1. Ensure it receives the best maintenance

When you maintain your machine, you make it quite efficient for use all the time. this can be the best way in which you can meet all … [Read the rest]

Things You Need To Know Before Buying A CO2 Laser Cutter

A CO2 laser cutter has really turn into a extremely popular tool for millions worldwide and it isn’t hard to understand why. These tools are extremely effective and have opened the door to a whole new world of potential. However, many hurry out to buy these tools and finish up buying the incorrect ones and it’s really a real waste of money and time.

If you’re considering buying a laser cutter, read on and discover a few simple things you really should know before you buy.

Renting Can Be A LOT MORE Cost-Effective

For most they will have a budget to utilize when they are buying a fresh device and you simply can’t blame people. Budgeting is an integral part of modern life as things are just so expensive. However, buying a laser cutter machine can really be too costly and if you don’t have a lot of money this will not be an option. This is something you must be wary of nevertheless, you don’t simply need to buy. You could lease a laser cutter which is something you want to remember as it’s easier on your purse-strings and more cost-effective too.

A Laser Cutter Machine Can Come In a concise Size

A lot of people are put-off the thought of choosing a CO2 laser cutter as they think it’s an extremely big item. While there are numerous larger laser cutters available, there are also many smaller ones too. You can get an industrial scale cutter or you can also get a home the one that is much less expensive and far more space conscious. Small sized laser cutters are no problem finding if you understand where to look for these people and they can be better if you would like to create a small business from home as well. There are of course larger cutters but smaller ones too so don’t believe you’re just jammed with the bigger items.

THERE ARE LOTS OF Brands Available

Another important things that you can remember is the fact that while there are many well-known brands, there’s also many lesser-known brands available also. However, while you might think the larger names are the only brands to choose from, don’t be so quick to dismiss. There are several smaller or lesser-known brands of fiber content laser chopping machine options that may be equally as good as the bigger brands.

  • This is something you want to keep in mind and you can certainly see there are extensive great options to consider.
  • Yes, the brands you discover might appeal to you more but it doesn’t mean to state the others can not be equally as
[Read the rest]

How to Set Up a Laser Engraving Business At Home!


Buying a hobby laser can be a great idea if you plan to do some at-home engraving. However, have you ever thought about how your part-time hobby could turn into a full-time career? If you are handy at using a laser engraver you could in fact use that at home and set up a little laser engraving business. Anything is possible and the best thing is that you don’t really need a huge amount of investment if it’s not available to you. Read on and find out how you can set up a laser engraving business at home.

Buy a Used Laser Machine

Laser engravers can end up costing thousands and thousands of dollars to purchase new – it could potentially be around ten thousand – and it’s a lot better to opt for used. Of course, if you have the extra funds available you could spend the extra money on a laser engraver but again it’s not always viable. Renting a laser for a little while is also a possibility but of course you have to think about the costs long and short-term in order to find the very best course of action. Buying a used hobby laser might not sound ideal especially when starting up a new business but it can be far better. You can actually save yourself a fortune and when there is extra money to spend you could go ahead and upgrade.  Read review of laser cutters before deciding on a specific company or laser cutter.  See this review here:  https://www.hobbylasercutter.com.

Practice with the Machine

If you have only ever used a laser engraver once or twice before then it isn’t always going to be practical to use in your business straight away. For instance, if you are asked to engrave a special item such as a bracelet you might want to get in a few hours of practice first before tackling the real thing. This will help ensure you fully understand and are aware how the engraver workers. What is more, you can ensure the hobby laser is practical and suits your needs too. It’s best to practice with it to make sure you know how it works before tackling real items.

Market Wisely

Next, it is a necessity to ensure you market your business well. This essentially means you have to look at local marketing first. You can get local customers first and until you establish yourself as an engraver stick with smaller jobs. When you have gotten a little more experience behind you, you could move onto bigger jobs. However, again, marketing is a crucial factor here. You could look into … [Read the rest]

Tool Necessities for Filming Movies

Have you ever had the pleasure of filming a movie? If not, you are missing out on quiet a wonderful experience because it can be fun to take part, regardless how insignificant it may seem. Everyone plays their part from the wardrobe and costume department to the actors and directors. However, there are some tools that newcomers to this industry forget when it comes to filming a movie and it can shut the project down before it’s even begun. So, what tools are must-haves when filming movies?

High Quality Cameras Are a Must-Have

You would think it’s a given to have a high quality camera when filming a movie and yet too many people forget about it. Some people think any camera that can record will be sufficient but that’s not the attitude to take. You have to remember, there are going to be scenes where you need a pan-out view as well as widescreen shots and not being able to hone in on a character at great distance is troublesome. That is why you have to ensure you buy a high quality camera so that you are able to do all the shots you want without any issues. Without a quality camera, you will have a lot of problems. More details here: http://www.desktop-documentaries.com/video-production-equipment.html

Laser Machines Are Musts for Scenery and Props

A lot of people don’t think too much about laser machines but they are truly vital when it comes to crafting new props and scenery. When you use laser cutting machines you can cut through fabrics and lots of other materials within seconds. This will essentially make the prop and costume department’s job easier and if you’re doing most of the hard work, it’ll be a vital tool to have. Also, the finish to the props and scenery can be great and it will look better than with sloppy edges or cuts. This is something you must consider when dealing with scenery or props.  If you’re a DIY’er think about utilizing CNC machines, 3D printers or laser cutters.  I recommend visiting Boss Laser for affordable laser cutting machinery.   If some of your movie props require metal cutting check this page out.

Lighting and Sound Tools and Equipment Are Crucial For Effective Filming

Unless you are filming a silent picture, you are going to have to ensure the sound mics you have are effective enough. You don’t just need one decent mic, you need high quality sound mics and booms to ensure all sound are picked up. It’s not ideal to go through filming and to watch the film back in the editing room only to find … [Read the rest]

Improve Your Films By using a Laser Machine

Filming a movie, TV show or a little drama can be fun and full of excitement. Actors, directors and all those involved with the project can really enjoy the experience and sometimes you need something there to give the project a kick. There is nothing better than a laser machine and this can be a simple tool to use. Anyone using a laser machine will see their films are far more better. So, why should you use one of these machines?

Props and Materials Can Have A High Quality Finished Look to Them

One of the top reasons as to why laser machines could be used is to help improve the final look to the props and scenery. If you use a laser machine you could find the props and other materials look far more high quality and that is great. You can absolutely find the items on set to look far more superior and that is what you want at the end of the day! There is no better time than to use the laser machine and it’ll prove to be a real hit.

Why Not Make Your Star Standout?

It’s not easy to make a movie without having areas which are let-down and it’s tough to make a real impact at times. That is why there are more and more who’re looking at simple tools to help add something more to their films. Movies can standout with a laser machine. You can absolutely see a big impact and a real difference once you use these tools. They are simple enough to set up and using them should be a piece of cake also. You will find they offer a little more ump to the movie which is really what all film makers want. It’s so easy to put a film together but to actually make it standout, it’s another matter entirely. With laser machines you can actually see your movies standout for all right reasons.

It’s Easy to Add More to Your Films with a Laser Machine

You might not think too much about using a laser machine but it can be a simple way to help add something extra to your movie. To be honest, there are many who do not consider using a laser machine in any way shape or form but it might prove to be a real winner. You have the ability to add something more to the movie with a laser machine. It’s not an overly costly tool and it can certainly ensure you get a top quality addition to your movie. Who wouldn’t want to improve their film slightly? With a simple … [Read the rest]

Copyright Spid Vid 2020
Tech Nerd theme designed by Siteturner