How to Get Started With Laser Cutting? – Beginners Guide


Laser Cutters are incredible apparatuses offering the likelihood to make a wide range of things. From straightforward boxes to etching nitty-gritty illustrations into wood or building complex three-dimensional articles.

What is a laser cutter?

A laser cutter is a PC controlled machine that uses a laser shaft to definitely cut or imprint material. A laser is essentially just exceptionally centered, profoundly enhanced light. The laser bar makes the material locally consume, dissolve or vaporize. The sort of material that a laser can cut relies upon the kind of laser and the particular machine’s capacity. The expression “Laser” is an abbreviation for “Light Amplification by Stimulated Emission of Radiation”. Laser innovation was created during the 1960s.

There are various kinds of laser cutters. This guide will concentrate on gas lasers and CO2 lasers specifically, as this sort is most generally utilized by hobbyists and private ventures. Different sorts are for instance fiber or gem lasers which are for the most part utilized for modern applications. CO2 laser cutters are fit for cutting and etching a wide scope of non-metallic materials, for example, wood, paper, acrylic, materials, and calfskin. For more materials and subtleties look here. Check here!

How does a laser cutter work?

In a CO2 laser cutter machine, the laser bar is made in a tube loaded up with CO2 gas. Next, with the assistance of mirrors and focal points, the laser shaft is coordinated to the laser head and concentrated on the material surface. Electronically controlled engines move the laser head to cut or etch the ideal shape into the material of the workpiece. At the point when the laser hits the material, a little zone is warmed in an amazingly brief period, making the material dissolve, consume or vaporize.


At the point when the laser pillar goes entirely through the material of the workpiece it makes a cut. A laser cut is commonly extremely exact and clean. The vibe of the cut edges relies upon the material. For instance, the edges of cut wood are average of a darker brown than the first wood. The edges of acrylic don’t change shading and have a decent lustrous completion after laser cutting. The kerf of a laser cutter is little. The term kerf alludes to the width of the notch made while cutting. This differs from material to material and is likewise subject to the particular settings of the laser. For some materials, the kerf will be somewhere close to 0.05 mm (0.002 in) and 0.5 mm (0.02 in).


Marking is the point at which the laser doesn’t expel material however for instance, changes the shade of … [Read the rest]

Mechanical Cutting vs. Laser Cutting vs. Milling

Nowadays, the most popular and broadly used cutting processes include mechanical cutting and laser cutting as well as milling. These processes perform the same task, but they are dissimilar in terms of equipment, production capabilities, and price. Each method has its own pros and cons.

1. Mechanical Cutting Process and Its Equipment

The mechanical cutting uses energy-driven equipment to shape the material along with a predefined design. Lathes, drill presses, and milling are the most common machines used in the mechanical cutting process.


The lather is a metallurgical machine that uses a computer controlled engine to spin the material. To prepare the desired shape, hardened cutting blades are used to eliminate needless cloth.

Drill Press

A drill press is driven by an induction motor and screwed to the floor or mounted on a table. It consists of a drill head, an axle, a table, a pillar as well as a base. The cylindrical holes are prepared in the workpiece using a drill that is lowered and raised by a three-pronged handle.


A milling machine is familiar with making the desired cuts; it has a moveable table that has the workpiece fond of it together with a stationary cutting tool. The instructions that are needed to move the board and make the desired cut are provided physically or through a computer. The four main categories of the milling machine are Omniversal, universal, flat milling and manual milling.

2. Laser Cutting Process and Its Procedure

Currently, laser cutting is the new and most competent way to cut material. Use the power emission device to do the work. To create the necessary cuts, a high concentration of photon fluxes is generally used. These currents are subject to the area where the basic cut will be made. The fact that these lasers are controlled by a computer eliminates the possibility of error. There are two different types of laser cutters: CO2 laser cutter and ND YAG laser cutter. Click here.

Mechanical Cutting vs. Laser Cutting

Because of the fact that laser cutting both cuts the material and applies a finish to a product, it can simply be said that laser cutting is a more agile process compared to its alternative mechanical cutting process. The possibilities of accidental markings or contamination in laser cutting are very low since there is no direct contact between the laser device and the material. In addition, laser cutting produces a smaller area affected by heat, which reduces the risk of deformation and wraps the material at the cutting site.

On the other hand, laser cutting can be a very expensive and multifaceted manufacturing method. However, … [Read the rest]

Things You Should Know Before Buying a Laser machine

Before you can purchase a laser machine, there are a couple of things that you should make sure about. Things that can influence the type of machine that you are going to purchase. Many people regret the laser cutter that they have bought. And, this just because they didn’t consider these things before, they were purchasing their machine.

The maintenance costs of the machine

Before you can purchase a laser cutter, you need to make sure that you know what the maintenance costs are going to be. Some of these machines are expensive to do maintenance on. And, this is something that you don’t want. The more you are spending on the maintenance, the less profit you are going to make at the end of the day.

Ask around and make sure that you are doing research about the maintenance costs of the machine. This is the only way that you can make sure that you are going to get the right cutter for your business.

Will you be able to get replacement parts easily?

When the laser machine breaks, and you need to replace a part, will the part be easy to find? The last thing that you want is to wait for weeks for the replacement parts to arrive so that you can continue on working.

The longer the machine is standing without repairs, the more money you are going to lose. Ask the agent and make sure that the replacement parts are always at hand. Without waiting for days before you can actually repair the machine.

How difficult is the laser cutter going to be to use?

Will anyone is able to use the laser cutter? You don’t want to have a laser cutter where your workers need to go on courses before they can use the cutter. This is going to cost extra money at the end of the day.

The easier the machine will operate, the better it will be for you, and the productivity of your business. You won’t need to worry about learning your workers how to use it correctly before you can start using it. Learn more.

Does the laser cutter have great features that are making it worth buying?

Different laser machines have different features. The more features the machine have, the better it will be for your business. And, the better it will be worth the money you spend on it.

This is why you should do some research and make sure that you are looking at the different features. By buying a machine with more features, you are going to get a much better deal.… [Read the rest]

Copyright Spid Vid 2020
Tech Nerd theme designed by Siteturner